This is a nice useful design. It can be configured in two ways a long narrow outline or square 4'x4'. I chose the latter. It comes well packed. Be advised that even though it is easy to assemble it will take some time- there are a LOT of screws/ The instructions are easy to follow. Construction was very good- all the holes lined up perfectly. All hardware was included. They even included a few extras just in case.I really liked the appearance. It was not the old, galvanized metal look rather it was a clean greyish finish.If you want to do the 4 x 4 layout like I did and use the included stabilizing bar, you will have to buy extra parts. They do NOT tell you the thread size in the instructions to link the two connecting bars (its metric -5mmx .8) There are only enough pieces to make one stabilizing bar. Since this is a short low bed, I opted not to use the stabilizing bar for the time being. I think it will hold up well enough. Finally- and I know this may seem a little nit - picky but the packaging is presented as biodegradable and compostable. For the most part it is, but it came with a LOT of plastic tape on the box which is not biodegradable. I threw it in the trash since I did not want all that tape in my soil. Suggest a switch to a paper-based tape or masking which will decompose. This is a good product, and I will likely order another in the spring

This is a planter bed that is absolutely built for a serious garden. It's a slightly higher price point but as soon as you get it, you get why. It is well worth it because it is top quality. I have 7 other metal raised beds and this one by far is the most heavy duty, it has the thickest metal, the only one with rust free screws and bolts and declared food safe compliance. The panels are evenly coated heavy duty steel. I love that they included cross rods to keep the shape and balance of the bed through time. It definitely feels durable and I would bet money on its lasting capabilities.It has sustainable packaging and thats always a win. I added mine to the bed as compost and filler when done. No film to peel saved time, no sharp edges and having spare parts included made putting it together easy. After some debate I chose the 4'x6' setup but I like that its versatile and can be made into the longer 2'x8' setup also. The moss green color is beautiful and calming. The only downside of this bed is the amount of soil you need to fill it up. But the 17" height makes it easier to garden if you have back or knee issues and is deep enough for root vegetables. No matter what you plan to grow this bed will work.I absolutely feel like this is one of the best options for a raised garden bed that I've seen amd experienced and I definitely whole heartedly recommend getting it.Review for: Annoell Galvanized Raised Garden Bed 8x2x1.5 ft, 17" Tall Planter Boxes Outdoor, Zn-Al-Mg Metal Raised Beds for Gardening Herb Fruit Vegetable, Modular Flower Bed for Outdoor Plants - Moss Green

This garden container arrives as individual panels with a bag of nuts and screws. The metal side panels are well packaged to prevent scraping the rust resistant coating, which seems thick and very durable. The directions for assembly are very clear, and this went together quickly and easily. The only issue I encountered was needing to flip some of the panels to line up the pre-drilled holes perfectly. There definitely seemed to be a top and bottom, however, there was no way to differentiate other than seeing if the holes lined up. It would be helpful if the company could mark with a sticker which end is up/down. I started with the corner panels so the unit would stand up independently during assembly, but wait to tighten the screws until all panels are together. The wing nuts, while quick, only let you finger tighten the screws. Though, maybe this is needed so you don't overtighten and dent the metal panels. I chose the 10'x2' layout to fit along the front of my house, but you can also build this as a 4'x8' or 6'x6' container. The threaded support bars really strengthen the long sides and make them rigid. I used all 8 bars, even though the directions only reccomended 6 for the 10'x2' design. I put 3 in the middle, 3 on one side, and 2 on the other. I actually wish there was one more so I could have put 3 supports at each attachment point for optimal stability. The 18" depth will work great for the cherry tomato plants I intend to fill this raised garden bed with in the spring. The roots will have enough room to spread out to secure the robust upper growth, and the soil shouldn't dry out too quickly. This is a great alternative if you don't have good ground soil or just want a more convenient option as far as weed control. While The metal will eventually rust, I expect to get many years from this planter with the well applied coating. I do hope the company will send me one extra support rod for the middle before gardening season arrives.

I really like this Annoell raised garden planter. Assembly was straightforward, no instructions were even needed. All the holes lined up perfectly. Extra screws and wing nuts were provided in case some were lost in assembly, a good precaution. The wall segments are corrugated for strength and stability and did not warp when turning the segments to access the screw holes.The edges are not sharp, preventing cuts. The color, in my opinion, is quite attractive.The 6 x 2 x 1.5’ configuration holds about 16.7 cuft or 125 gal of planting mix. I have already planted spinach and lettuce for a Fall garden.This planter has no bottom, so if you are worried about burrowing animals or tree roots, equip the planter accordingly.

I have a large garden with several raised garden boxes, many of them are a similar design to this box. This box has some nice design upgrades, one being no annoying plastic film to remove. It also doesn't have the hard to install rubber trim, instead it has a smooth edge that won't cut or injure you. Assembly was relatively easy. I typically fasten all of the screws and butterfly nuts loosely, and then when everything is in place, we tighten them all with the drill and plyers for a fast way to finish. It worked perfectly and the stabilizer bars were super easy to install. The finish has a slight texture to it, which looks nice. Overall, very pleased with it.

First off, the panels are way nicer than I thought they would be. The finish is very nice. Feels very premium. Can be configured in different ways. The hardware felt a bit cheap but held up pretty good. They're just screws and wing-nuts. Came with plenty of extras too. I like that even the bag the hardware came in was compostable. I like when a company sticks to their mission.This garden bed looks great. Feels top quality. I'm excited for it to be a part of my yard.

Perfect for the garden with limited space but works as part of larger setup also.Can be configured as 2x8 or 4x6. I prefer the 4 ft width, so went with the 4x6.Excellent packing WITHOUT the annoying film that I hate to have to remove. That stuff took hours on the last one I worked on and the paint was still scratched in multiple places. Not a single scratch on any of the panels with this product. The powder coating is very good quality. Should provide many years of corrosion protection, unlike the bare thin galvanized one that has only lasted 1 year before rusting though in a couple of places. The packing is good quality cardboard that also makes excellent ground cover for bottom of bed. No bent panels or bent corners.The edges don't have any sharp or pointed corners. This product does not provide the worthless pair of gloves found with other products. Any good pair of gardening gloves will work great, and since we all only buy our size, they also fit. I did NOT use any gloves and not a scratch during assembly, and I have very old thin skin.This setup uses shorter panels and the shorter length combined with the overlapped seams makes this one of the sturdiest containers I've assembled. The other feature that places this product far above the others is the center stiffener rods in this design are actually rods that have nut inserts on both ends instead of the cheap crushed tubing tabs that provide very little structural support.There are also plenty of spare parts, so dropping one, isn't a show stopper.The paint color (cream colored) is also very functional and should help cool the root systems during hot summer days.

Very solid bed. Galvanized steel material is great and there was no risk of being cut but any sharp edge on assembly. With 48 bolts and wing nuts it was a little tedious to put together but I would definitely recommend this product.

I am so excited to put this together and use it in the spring for my herb garden. This galvanized raised garden bed is painted a beautiful organic green and is made from very thick, sturdy metal. All parts and pieces, including the screwdriver and the instructions, were easy to follow. I will be using it this fall and winter to mix compost and prepare to plant in the spring. The bed itself measures 6 ft x 2 ft x 1.5 ft, there’s plenty of room to vary your plants. I absolutely love the intentional structure that was put into this bed. The Eco-Safe Design that is Non-toxic, RoHS, and Prop 65–compliant materials for organic gardening. The paint is safe, and the stainless steel hardware is Food-grade, and coated edges prevent rust. Even the packaging is compostable.

This wonderful galvanized metal moss green raised garden bed is ready for soil and plants. Setting it up took a bit of time, primarily because of screwing all the pieces together. However, it was a fairly easy process as the screws and holes all lined up, threads on the screws were good, and the panels were painted to perfection (see photo attached to this review for how it looks assembled). You will want to note that it assembles much more easily if all of the screws are left quite loose until the whole garden bed is formed and then go back and tighten them all.